Legal disclaimer :
We do not prescribe, diagnose, or make any medical claim or advices.
The principles, assumptions or theories exposed here have no medical or scientific value officially recognized.
Please note that Dr Clark’s books or devices have not been evaluated by Health Canada (Canada) or Food and Drugs Administration (USA), and then, have not received any guarantee on their effectiveness or their safety.
Zappers can only be sold or used as experimental devices for educational research. They are not intended for use in the cure, treatment, prevention, diagnostic of any disease.
If illness is an issue, please consult a licensed health professional before attempting any self health program.
By using this information without the approval of a licensed health professional, you are prescribing for yourself, as permitted by law, and you take full responsibility for the results.
These results may vary depending on individuals
Certain Internet sites associate zapper and serious illness.
It is not our role to make such assertions.
Illness does not interest us.
We leave it to the experts of the unhealthy states.
We are only interested to feel better, which is highly subjective, and to get rid of as much “invaders” who drain our resources, as possible. These invaders, who live at our expense, we name them under the generic name of “parasites”.
We experience the influence of the zapper effect
on these parasites, on a hypothetical and empirical basis,
which have nothing to do with medical or scientific rules.
MZ6CCS : This zapper is an enhanced version of the MZ6
6 frequencies zapper with a 3.5mA current source
A local health professional requested a MZ6 able to be used "all day long" with constant results, without
having to worry about battery's voltage. A wall plug supply was not advisable.
We provided this MZ6 with the excellent current source used on the MZ3, giving a fixed 3.5mA current source.
If you doesn't want the voltage of your zapper drive the efficiency of your MZ6, this MZ6CCS is for you!
Safety first ! This circuit permits a powerful and constant zapping, from beginning to end, without any
need to be connected to an outside battery eliminator (itself connected to the 110/220VAC power line !)
This adds too to your freedom : You can use your zapper anywhere, inside or outdoor
Exclusively operated by a 9V battery, for a full safe operation
Cost? : bellow 2 cent per 7-20 session!
Extended duty cycle of 93.5%, precision 1% on 2.5kHz, for an optimum production of harmonics
Frequency accuracy of 1% or better.
Choice of frequencies
Two selectors permits a direct choice to these frequencies in 2 selections
SEL_1 Freq_1 = 30kHz. Best transfer of energy. Main frequency used by Dr Clark on most of her work
SEL_1 Freq_2 = L A R G E sweep 8kHz to 16kHz, using 255 different frequencies and a pseudo random
number generator. Duty cycle 80% to90%. Specially designed by MZ.
SEL_1 Freq_3 = Narrow Sweep around 2.5kHz. A very popular frequency, used when 30kHz doesn't
work fast enough. In this special Maestro-Zapper's version, this "frequency" makes a narrow sweep of 64
different frequencies, for an improved action of MOR (Mortal Oscillatory Rates)
SEL_2 Freq_1 = 1.0kHz. Recommended by Dr Clark for food zapping (zappicator)
SEL_2 Freq_2 = 15Hz. Another very popular frequency, whispering to your brain.
SEL_2 Freq_3 = 7.83Hz. Schumann Hearth's frequency. A very popular frequency for many uses. A
first in zapping use! This very low frequency is carried by a 10kHz frequency, for a high zapping
Voltage of Battery indicator, giving you 4 levels of voltage at the beginning of the session.
You can at all times, verify that current is flowing out of your zapper (The zapper is well connected)
High Pass Output Filter ("Super Stabilized Waveform"), not needed.
New HH4 (99.5% pure) copper handhold 0.87" Dia and 4.3" long, for an efficient, easy to hold, reusable
You will easily found a more promising publicity, but certainly not a better 6 frequencies zapper,
at this price!!
This zapper follows "by the book"
Dr. Clark's specifications :
** Output exclusively positive
** Positive offset only (at least +
** Sufficient voltage (5 to 10V)
** Frequency (anything from
10Hz to 500 000Hz)
** Original, improved sequence
7mn On, 20mn pause.
= Case ABS 3.60"x2.62"x1.15 " (92mmx67mmx28mm) with snap-in battery door.
= Very flexible BLACK and RED Test Lead cables, rated MIL-I-3930A spec, with alligator clips.
= Handhold : 99.5% pure Copper tubes, 0.87"Dia, 4.5" long (22mm Dia, 11cm long)
= 2 Layer Printed Circuit Board, industrial grade, with solder mask.
= Uses SMT technology, with 1% values on all important components.
uC and other IC's are CMOS
= Uses any 9V battery (Alkaline for long lasting use). Maximum input voltage (battery ) 10V
= Protected against accidental battery reversal. Battery level indication at start-up
= Constant Current Source of 3,5mA
= In Memory Frequencies (All 1%) :
= 30.303kHz - Duty Cycle 57%
= Large Sweep from 8kHz to 16kHz - 255 frequencies rolling non-stop, using a pseudo random
number generator. Duty Cycle = 80% to 90%
= 2.5kHz with a narrow frequency sweep from 2424Hz to 2522Hz - 64 frequencies rolling
non- stop, using a pseudo random number generator. RC = 93.5%
= 1kHz - RC = 90%
= 15Hz - RC = 90%
= 7.83Hz - supported by a 10kHz, RC 90% carrier
Isochronic modulation for an optimal efficiency
= Output impedance : Dynamic current source
= High -3db cut-off frequency : 3.5mHz
= LED indicator for battery level, ON and output current indication.
= Same LED indicator is used as "well connected output" analogic indicator
= 1 year Warranty against manufacture defaults
You will receive :
= 1x MZ6CVS zapper
= 2x copper handhold
= A User manual (PDF)
= H. Clark's pathogen frequency
= And 1 year warranty against
= And 60 days of
(limited) trial (money back
Price and rates
Very few companies will show
you how their zapper looks
We are proud of our unit, how it is
made, how it looks on the outside,
and how serious is the workmanship
in the inside.
DOCUMENTS IN CONNECTION
WITH THIS PRODUCT :
Nominal frequencies generated
by the 2.5kHz sweep.
All these frequencies are generated
by a "random number generator", for
a maximum production of harmonics
Frequencies in Hz
2426 2427 2429 2430 2432
2433 2435 2436 2438 2439
2441 2442 2443 2445 2446
2448 2449 2451 2452 2454
2455 2457 2459 2460 2462
2463 2465 2466 2468 2469
2471 2472 2474 2475 2477
2478 2480 2481 2483 2484
2486 2488 2489 2491 2492
2494 2495 2497 2498 2500
2502 2503 2505 2506 2508
2509 2511 2513 2514 2516
2517 2519 2520 2522
Everyone of these frequencies will
make a high number of odd and even
harmonics, due to the very long duty
cycle of the waveform (D/C =
All our devices are delivered
due to postal restrictions
Applied Electronic to Well-Being and
The Dr. Hulda Clark's zapper
Why a Constant Current Source? (Very technical stuff)
(Extract from our main manual)
A zapper kills parasites because of the action of its battery (Direct Current), making
possible to a direct flow of current to run into our body.
No matter the voltage applied, you will need a MINIMUM of CURRENT at destination, and no much
more, for obvious safety reasons : We want to kill pathogens IN VIVO (You, staying alive (:-)
For these same reasons, even a simple 9V battery can be lethal if this very low voltage is applied
directly across the hearth, without any current limiting device (called a RESISTOR).
Ohms Law I=V/R explain the mathematical part of this fact.
This is why the original zapper had a 1000_Ohms resistor to limit maximum current in a
safe, simple and inexpensive way.
Our design problem with zappers, is that most electronic circuits, including the popular
555 oscillator, work with VOLTAGE, current being only a Ohms Law “side effect”.
Because the skin is a wonderful protector against many external aggressions, including Direct
Current, a zapper uses a “high frequency” to overpass this protection, and a square wave to build
harmonics, who are higher frequencies passing even better the skin barrier.
Many manufacturers place a High Pass Filter on the output resistor, to permit to high frequencies to
better pass through the output stage.
Simple, precise words not selling very well, buzzwords like “expensive super stabilized waves”,
“constant waves” and other definitions had been attributed to this simple circuit.
One of the consequences of this High Pass Filter has been to decrease the original output
impedance to almost 0, leaving the zapper without any safety, current wise.
1_ Controlling current is the obvious way to make a zapper work well, as intended
2_ Most electronic circuits are available with voltage control only.
3_ To make a safe, efficient zapper, we need to introduce into the output stage a very
fast (harmonics) current control circuit.
4_ This Current Control Circuit has an electronic name : A constant Current Source
The main problem with this “Fast Reacting, Constant Current Source” circuit, is that it is more
difficult/expensive to implement that the 555 zapper itself.
Because at Maestro-Zapper we want to make good, safe, efficient, state of the art
zappers, we have designed this circuit for our MZ3c.
The designed Constant Current Source has many interesting characteristics :
1_ Fixed to a 3.5mA. Original zapper had a peak current of around
3.5mA on best use. Some zappers are still efficient with 1.5mA.
2_ High speed reaction well under one microsecond (0.000 001s) permits to this circuit to
work without any scary High pass filter of any kind, and gives sharp square waves, rich in
3_ This very fast reaction time permits a strong, firm, safe control of current no matter
how the load (you) could react.
This last point, never mentioned, is a real nightmare when you start trying to resolve-it.
Most zappers have no control, for a very good reason :
How your body will react to a voltage source? : In many different ways, depending on:
= Tiredness, health, age of the person;
= From the relative humidity of the skin at points of contact;
= The quality of the skin;
= From the contact area;
= From the voltage applied between the contact points.
= And of utmost importance to us: From the frequency used.
Controlling the current as we do makes this last point an obsolete problem : Current value
sticks to 3.5mA. If your body varies its impedance, the CCS will adjust itself and continue to give
the requested current, by design.
Nominal frequencies generated by the FV sweep frequency of the MZ3b, between 7937Hz and
16000Hz, for a total of 255 frequencies. Frequencies in Hz
All these frequencies are generated by a "random number generator", for a maximum production of
7937 7952 7968 7984 8000 8016 8032 8048 8065 8081 8097 8114 8130
8147 8163 8180 8197 8214 8230 8247 8264 8282 8299 8316 8333 8351
8368 8386 8403 8421 8439 8457 8475 8493 8511 8529 8547 8565 8584
8602 8621 8639 8658 8677 8696 8715 8734 8753 8772 8791 8811 8830
8850 8869 8889 8909 8929 8949 8969 8989 9009 9029 9050 9070 9091
9112 9132 9153 9174 9195 9217 9238 9259 9281 9302 9324 9346 9368
9390 9412 9434 9456 9479 9501 9524 9547 9569 9592 9615 9639 9662
9685 9709 9732 9756 9780 9804 9828 9852 9877 9901 9926 9950 9975
10000 10025 10050 10076 10101 10127 10152 10178 10204 10230 10256 10283 10309
10336 10363 10390 10417 10444 10471 10499 10526 10554 10582 10610 10638 10667
10695 10724 10753 10782 10811 10840 10870 10899 10929 10959 10989 11019 11050
11080 11111 11142 11173 11204 11236 11268 11299 11331 11364 11396 11429 11461
11494 11527 11561 11594 11628 11662 11696 11730 11765 11799 11834 11869 11905
11940 11976 12012 12048 12085 12121 12158 12195 12232 12270 12308 12346 12384
12422 12461 12500 12539 12579 12618 12658 12698 12739 12780 12821 12862 12903
12945 12987 13029 13072 13115 13158 13201 13245 13289 13333 13378 13423 13468
13514 13559 13605 13652 13699 13746 13793 13841 13889 13937 13986 14035 14085
14134 14184 14235 14286 14337 14388 14440 14493 14545 14599 14652 14706 14760
14815 14870 14925 14981 15038 15094 15152 15209 15267 15326 15385 15444 15504
15564 15625 15686 15748 15810 15873 15936 16000
Everyone of these frequencies will make a high number of odd and even harmonics, due to the very long
duty cycle of the waveform (D/C = 80 to 90%).